2130-KIT-1

Transmission Adapter – Ford pattern T5 to 1940-1954 Chevrolet Bell Housing

$175.00

Product Description

 

Ford pattern T5 to 1940-1954 Chevrolet bell housing transmission adapter

 

When you’re cruising down the road in your classic Chevrolet, do you ever try to grab another gear and then realize that third gear is as high as you can go? We have the solution! Make your car more drivable by putting a 5-speed transmission behind that sweet 6-cylinder engine with our transmission adapter kit.

This T5 transmission adapter kit is used to adapt the Ford pattern T5 transmission to the 1940-1954 Chevrolet passenger car bell housing.

Our transmission adaption kit contains:

– (1) Adapter Plate
– (2) 3/8-16 X 1 ¼ flat head screws
– (2) 3/8-16 x 1 ¼ cap screws
– (2) 3/8 lock washers
– (4) 1/2-13 x 1 ¼ cap screws
– (4) ½ lock washers

This kit is 100% made in the USA. Our adapter plates are precision-machined from high strength 7075 aluminum alloy.

Please read further to ensure this product suits your needs.

The adapter positions the clutch disc in the proper place on the input shaft. No modifications are required on the input shaft or clutch disc for installation.

Examples of the Ford pattern T5 transmissions include:
1986 Chevrolet Astro Van
1993 and later Chevrolet S10
1996-2002 Chevrolet Camaro V6

Examples of the 1940-1954 Chevy bell housings include the following casting numbers:
839181
3688001
3701429
3836435

2130 KIT-1

PLEASE NOTE:
1) An open drive rear axle is required to complete the transmission conversion.
2) This transmission adapter kit requires a transmission with an input shaft length of 7 1/8” from the trans mounting surface to the end of the shaft. If your transmission input shaft is shorter, you should install an extended pilot bushing into the crank shaft.
3) If your transmission used a hydraulic clutch, you must replace the front bearing retainer with one that has a conventional clutch release bearing sleeve. These are available from Hot Rod Works – please click here to view this product (SKU #: 2115).

More on the clutch disc: The original 1940-1954 clutch disc is 9” diameter, 10 spline. The T5 transmission is typically 26 spline. Use a 1994-1995 S10 2.2L 4 cylinder clutch disc, 9.125” dia, 26 spline. SACHS #1878-654-589.

Use the early Chevy pressure plate and clutch release bearing.

 

Is this Ford pattern T5 to 1940-1954 Chevrolet Bell Housing Transmission Adapter exactly what you’re looking for? Add this product to your cart or call us at (208) 455-7971 to order today!

Reviews

There are no reviews yet.

Be the first to review “Transmission Adapter – Ford pattern T5 to 1940-1954 Chevrolet Bell Housing”

Additional Information

Weight 7 lbs
Dimensions 12 x 9 x 3 in