1968 and later Chevrolet Pickup T5 Transmission Adapter (5 1/8″ bore)

$185.00

Description

T5 – Muncie pattern transmission adapter, 5 1/8″ bore

Use our Muncie pattern transmission adapter to mount a 1982-1992 S10 5-speed transmission or Blazer 2-wheel drive transmission behind your Chevy pickup’s bell housing. This adapter is designed specifically for a Muncie or Saginaw style bell housing with a 5.125″ register hole.

The adapter positions the clutch disc in the proper place on the input shaft. No modifications are required on the input shaft or clutch disc for installation.

Our adapter kit includes:

– Transmission adapter plate
– (4) ½ – 13×2” cap screws
– (4) ½” lock washers
Installation instructions

Every component of this kit is 100% made in the USA and has been carefully crafted for a precise fit.

Please note that a new clutch disc is required for the installation of a new transmission in your classic Chevrolet. This part is NOT included in our kit. In the instructions, we have listed part numbers for clutch discs of different diameters so you can match the size of your current disc.

PLEASE NOTE:
1) This transmission adapter kit requires a transmission with an input shaft length of 7 1/8” from the trans mounting surface to the end of the shaft. If your transmission input shaft is shorter, you should install an extended pilot bushing into the crank shaft.
2) If your transmission used a hydraulic clutch, you must replace the front bearing retainer with one that has a conventional clutch release bearing sleeve. These are available from Hot Rod Works please click here to view this product (SKU #: 2115).
3) On manual clutch applications the throw out bearing sleeve on the bearing retainer need’s to be shortened. This is included in the instructions.

Additional information

Weight 3.5 lbs
Dimensions 10 × 7 × 1 in

Reviews

There are no reviews yet.

Be the first to review “1968 and later Chevrolet Pickup T5 Transmission Adapter (5 1/8″ bore)”

Your email address will not be published.